Badger-meter 340LW Series Lonworks Btu Transmitter User Manual

BadgerMeter, Inc.Installation &Operation ManualBadger®Series 340LWBtu TransmitterWith LONWORKS®872038Rev. 6 4-09

10Energy Object #2(Object Type #1)Mandatory NVsnvo04EnergyRateSNVT_power_fnv1Optional Configuration Propertiesnc22nciEnRtMaxSendTSNVT_elapsed_tmnvo05E

11Communications Status Object #4(Object Type #1)Mandatory NVsnvo11CommStatusSNVT_countnv1output SNVT types:flow rate -> SNVT_flow_f -1E38 .. 1E38

12SPECIFICATIONSPowerPower supply options: 12-35 VDC +/- 5% 12-24 VAC +/- 10%Current Draw: 60 mA @ 12 VDCFlow Sensor InputAll sensors: Excitation

13FACTORY DEFAULTSDefault Values Customer Values Serial Number n/a Version n/a Temperature Units °F Sensor Type Pulse K= 1 Offset= 0 Flow Rate Uni

15(This page intentionally left blank)

Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specifications without

2The Badger Meter Series 340LW Btu Transmitter is an economical, compact device for sub-metering applications that use the LONWORKS® protocol in an ad

3INSTALLATIONMechanical installationThe Badger® Series 340LW transmitter may be sur-face mounted onto a panel, attached to DIN rails using adapter cli

4the box cover using double-sided adhesive tape.Temperature Sensor InstallationThe location of the temperature sensors with regard to the flow sensor

5Sensor WiringAll flow sensor types connect to the four terminal header labeled “sensor input”. Series 200Connect the red wire to sensor signal (+),

6Programming in Comm Mode Programming the Badger® Series 340LW is accomplished by installing the Badger Meter programming software on a computer and e

7Note #1:Badger Meter flow sensor K and Offset information is printed in the flow sensor owners manual, and also available on our website. Calibration

8Commisioning:Before the Badger® Series 340LW can be used on the LonWorks network, a network tool must commission it.The 340 LW has a red “Wink” LED a

9nvi00Request types: RQ_NORMAL: for measurement Objects #1 - 3, updates SNVTs with latest value read from Series 340RQ_OVERRIDE: for Objects #1 or